Probes, Cables & Calibration Blocks



Probes, Cables & Calibration Blocks


Ultrasonic probe/transducer is the heart of any ultrasonic test. Inappropriate transducer selection or a poorly manufactured or malfunctioning transducer can severely affect test results regardless of instrumentation capability. We offer a full line of standard and special transducers.


General Purpose Probes


We offer full range of general purpose probes from our sister company M/s. Arora Technologies (P) Limited


Delay Line Probes


Delay Line Probes We offer a complete line of high resolution; highly damped delay line probes both with fixed and removable delays. These delay line transducers are recommended for inspection of thin materials, near surface flaw detection and thickness gauging of thin materials. These transducers are also available with high temperature options.


Immersion Transducers


Immersion Transducers We offer a complete line of high resolution; highly damped delay line probes both with fixed and removable delays. These delay line transducers are recommended for inspection of thin materials, near surface flaw detection and thickness gauging of thin materials. These transducers are also available with high temperature options.


All immersion transducers are offered in high resolution, general purpose and high sensitivity.


Phased Array Probes


Phased Array Probes The X-Series range of phased array probes have an integral 2.5 metre cable and IPEX connector. The range is compatible with the the Sonatest VEO series and other leading phased array equipment. The X-Series offers the operator a broader choice in range and frequencies; together with the assurance of industry standard configurations.


  • X1 Series – Miniature & Sub-Miniature PA Probes
  • X2 Series – General Purpose PA Probes
  • X3 Series – Long Array Probes for Electronic Scanning
  • X4 Series – Miniature Phased Array Probes with Integral Wedge
  • X5 Series – Medium Phased Array Probes – AWS, High Temperature & Deep Penetration

DOWNLOAD BROCHURE


TOFD Probes & Wedges


TOFD Probes & Wedges TOFD transducers and wedges generate refracted longitudinal waves in steel. These highly damped longitudinal wave probes provide a high resolution and performance.


Phoenix manufactures a wide range of composite and non-composite TOFD transducers of varying crystal diameters from 2MHz to 15MHz and frequencies ranging from approximately 3.1mm to 20mm. They are for use with the Phoenix range of TOFD wedges.


High temperature Probes


High temperature probes allow more rapid and cost effective testing by removing the need to cool surfaces in advance. The Phoenix high temperature range has a variety of transducers designed to perform reliably on surfaces at temperatures from 80˚C to 200˚ C


Flexible Probes


Flexible Probes Flex transducers are thin, compliant ultrasonic probes that can conform to curved surfaces using fingertip pressure. This enables them to be used on non-flat components to provide improved ultrasound transmission compared to standard hard faced transducers. Flex transducers are made of a thin but durable piezo-electric material that is soft enough to bend and can be shaped to suit curved geometry. By using a soft backing layer, the flexibility of the crystal is retained. The Flex series are available as single element anddual element formats. Standard Flex transducers are 5MHz or 10MHz at sizes of Ø6mm, Ø10mm or Ø20mm diameter. Flex transducers are ideal for inspecting radius areas of composites and accessing complex geometries in metals, such as weld cap areas or castings. They can be used with any standard ultrasonic instrument.


DOWNLOAD BROCHURE


RTD Probes


RTD Probes are well known in the nuclear industry for inspection of critical weld areas in pipes and pressure vessels. The realm of applications for these transducers is extensive: inspection of coarse grain austenitic steel, location of under cladding cracks, detection and sizing of IGSCC (Intergranular Stress-Corrosion Cracking), automated scanning of pipe and pressure vessels, and continuous high temperature applications.


DOWNLOAD BROCHURE


Cables


Cables We offer full range of ultrasonic testing cables from our sister company M/s. Arora Technologies (P) Limited. These cables are designed & manufactured with reinforced junctions between the cable & the connector. Cables are available in single, dual with Lemo 00, Lemo 01, BNC, Microdot or Subvis connector. We can also offer customized cable depending upon your needs or application.



Test Blocks


Test Blocks We offer a complete selection of standard and custom ultrasonic reference standards (also referred to as test blocks or calibration blocks) from our sister company M/s. Arora Technologies (P) Limited & PH Tool, USA.
We offer Manufactured to exacting tolerances; all the reference standards are made from metal stocks that have been ultrasonically inspected prior to fabrication